z
Audio over IP
The setting is confirmed with the [Set] button.
Audio transmission [Off, On]
Set the communication mode used to transmit audio data to a
personal computer, etc.
Off
Do not transmit audio data. All settings and controls
related to audio will be disabled.
On
Transmit audio data.
This allows audio as well as images to be viewed on
the personal computer.
Factory settings:
On
Audio bit rate [64kbps, 96kbps, 128kbps]
Set the bit rate for transmitting audio.
Factory settings:
128kbps
Image adjust screen [Image adjust]
Adjust the image quality.
The settings in this screen (with the exception of [Scene] and [Matrix])
are applied immediately. After selecting the settings for [Scene] and
[Matrix], you need to press the [Set] button to execute.
Scene [Full Auto, Scene1, Scene2, Scene3]
Switch the shooting mode depending on the shooting environment.
Select a shooting mode based on the shooting conditions or
preference.
Select a shooting mode from the pull-down menu, and click the [Set]
button to switch to the selected mode.
Full Auto
Modes that allow you to adjust detailed settings manually
for various shooting conditions and preferences. MENU
setting items that are treated automatically will have
“– – –” displayed and the setting cannot be changed.
Scene1
The various image quality setting items are initialized to
the same values as [Full Auto], and then the settings for
the items can be changed.
Scene2
The various image quality setting items are initialized to
be suited to low-light environments, and then the settings
for the items can be changed.
Scene3
The various image quality setting items are initialized to
values that prioritize manual operations, and then the
settings for the items can be changed.
Factory settings:
Full Auto
Scene Copy
This is selected to copy the various bits of Scene data recorded in the
camera ([Full Auto]/[Scene1]/[Scene2]/[Scene3]) to each other.
From [Full Auto, Scene1, Scene2, Scene3]
Select the Scene to copy data from.
Factory settings:
Scene1
To [Full Auto, Scene1, Scene2, Scene3]
Select the Scene to copy data to.
Factory settings:
Scene1
<NOTE>
• When copying between [Full Auto], and [Scene1] to [Scene3],
some setting values may be changed according to some exclusive
conditions.
• When [From] is [Full Auto], for items that are operating as [Auto],
the operating setting values are applied at the time that the copy is
implemented.
Camera control/Setup Menu button
You can display the camera control screen by clicking the [Camera
control] button.
You can control the camera while adjusting the image quality.
110
111
Web screen configurations (continued)
