manualshive.com logo in svg

Panasonic AW-UE80WP, Operating Instructions Manual

Share
Download
Panasonic AW-UE80WP Operating Instructions Manual Download Page 114

ND Filter [Through, 1/4, 1/16, 1/64, Auto]

Set the transmittance of the lens' built-in ND (neutral density) filter.

The filter switches when the setting is fixed.

Through

Do not set ND filter.

1/4

Set ND filter transmittance to 1/4.

1/16

Set ND filter transmittance to 1/16.

1/64

Set ND filter transmittance to 1/64.

Auto

The transmittance of the ND filter is automatically adjusted 

to one of [Through], [1/4], [1/16], or [1/64].

This can only be set when [Scene] is [Full Auto].

Factory settings:

 Through

Day/Night [Day, Night]

Switch between standard shooting and night-vision shooting (shooting 

with infrared light).

Day

Standard shooting (day mode)

Night

Night-vision shooting (night mode)

Factory settings:

 Day

<NOTE>

• In night mode, video output will be in black and white. In addition, 

the iris will be forcibly opened.

• White balance adjustment is not possible in night mode.

• ND filter switching is not possible in night mode.

• [Pedestal] cannot be performed properly in night mode.

„

z

Picture

114

Web screen configurations  (continued)

Summary of Contents for AW-UE80WP









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands