manualshive.com logo in svg

Panasonic AW-UE80WP, Operating Instructions Manual

Share
Download
Panasonic AW-UE80WP Operating Instructions Manual Download Page 109

„

z

High bandwidth NDI

Make NDI transmission settings.

The setting is confirmed with the [Set] button.

High bandwidth NDI

Format

Displays the resolution of NDI images.

<NOTE>

• For the resolution set to Format, confirm the output conditions for 

each video format (→ page 19).

Source name

Set the device name displayed when this unit is detected by software 

applications and hardware compatible with NDI.

Factory settings:

 NDI Device [serial number of this unit]

Protocol [TCP, UDP]

Sets the format of unicast transmission to be used.

Factory settings:

 TCP

Multicast Transmit [On, Off]

Sets whether to perform multicast transmission of images for the 

software applications and hardware compatible with NDI.

Factory settings:

 Off

Address(IPv4)

[IPv4 : 244.0.0.0 to 239.255.255.255]

Enter the multicast IP address.

Images and audio will be sent to the specified IP address.

Factory settings:

 239.192.0.30

<NOTE>

• Verify usable multicast IP addresses before entering this setting.

Subnet(IPv4)

Enter the subnet mask.

Factory settings:

 224.0.0.0

<NOTE>

• [Address(IPv4)] and [Subnet(IPv4)] clarify the multicast address 

ranges randomly selected during multicast transmissions.

• When [Address(IPv4)] is set to “239.255.0.0” and [Subnet(IPv4)] is 

set to “255.255.0.0”, the selection is made randomly in the range 

between “239.255.0.0” and “239.255.255.255”.

• To use the IP address set in [Address(IPv4)], set [Subnet(IPv4)] to 

“255.255.255.255”.

TTL/HOP Limit

The same as H.264 [Multicast TTL/HOPLimit] (→ page 104).

Group [Enable, Disable]

Sets whether to use the grouping function when performing NDI 

transmission.

Factory settings:

 Disable

Name 

Sets the group name for use when grouping function is used.

Use discovery server

Sets whether to use the discovery server when performing NDI 

transmission.

Server address(IPv4) 

Sets the IPv4 address of the server when using the discovery 

server.

108

109

Web screen configurations  (continued)

Summary of Contents for AW-UE80WP









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands