White Balance Mode
[ATW, AWB A, AWB B, 3200K, 5600K, VAR]
Set the white balance mode.
Select the mode when the coloring is not natural because of the
nature of the light source or other factors.
If the white color serving as the reference can be recognized, subjects
can be shot with natural coloring.
ATW
In this mode, the white balance is compensated for
automatically, even if changes occur in the light source or
color temperature, by a process of continuous and automatic
adjustment.
AWB A
AWB B
When [AWB A] or [AWB B] is selected and the white balance
is executed, the adjustment results obtained are stored in
the memory selected. When [AWB A] or [AWB B] is then
selected, the white balance stored in the selected memory
can be recalled.
3200K
This is the white balance mode which is ideal when a 3200K
halogen light is used as the light source.
5600K
This is the white balance mode which is ideal when 5600K
sunlight or fluorescent lighting is used as the light source.
VAR
You can specify a color temperature between 2000K to
15000K.
Factory settings:
Refer to the “Camera menu item table”.
AWB
When the [Execute] button is clicked, automatic white balance (AWB)
is executed and the white balance is reset.
Its setting takes effect when [AWB A] or [AWB B] has been selected
as the [White Balance Mode] setting.
Color Temperature [2000K to 15000K]
You can specify a color temperature between 2000K to 15000K.
Its setting takes effect when [VAR] has been selected as the [White
Balance Mode] setting.
Factory settings:
3200K
R Gain [–200 to +200]
This enables the R gain to be adjusted.
Its setting takes effect when [AWB A], [AWB B] or [VAR] has been
selected as the [White Balance Mode] setting.
Factory settings:
0
B Gain [–200 to +200]
This enables the B gain to be adjusted.
Its setting takes effect when [AWB A], [AWB B] or [VAR] has been
selected as the [White Balance Mode] setting.
Factory settings:
0
AWB Color TEMP. Info [2000K to 15000K]
This displays the color temperature when [White Balance Mode] is
[AWB A] or [AWB B]. (reference only)
Its setting takes effect when [AWB A] or [AWB B] has been selected
as the [White Balance Mode] setting.
AWB Gain Offset [Off, On]
When auto white balance is performed by setting [White Balance
Mode] to [AWB A] or [AWB B], set the values for Rch gain and Bch
gain.
Off
Set the value of [R Gain] and [B Gain] to [0].
On
Maintain the value set in [R Gain] and [B Gain].
Factory settings:
Off
ATW Speed [Slow, Normal, Fast]
Set the control speed of the ATW function.
Slow
Tracks at a speed slower than [Normal].
Normal
Tracks at normal speed.
Fast
Tracks at a speed faster than [Normal].
This is only enabled when [White Balance Mode] is set to [ATW].
Factory settings:
Normal
ATW Target R [–10 to +10]
Make fine adjustments to the Rch output when converging with the
auto tracking white balance operation.
This is only enabled when [White Balance Mode] is set to [ATW].
Factory settings:
0
ATW Target B [–10 to +10]
Make fine adjustments to the Bch output when converging with the
auto tracking white balance operation.
This is only enabled when [White Balance Mode] is set to [ATW].
Factory settings:
0
Chroma Level [Off, –99% to 99%]
Set here the color intensity (chroma level) of the images.
Factory settings:
0%
Chroma Phase [–31 to +31]
Make fine adjustments to the hue of the colors in the images.
Factory settings:
0
ABB
When the [Execute] button is clicked, automatic black balance (ABB)
is executed and the black balance is reset.
Master Pedestal [–200 to +200]
This item is used to adjust the black level (adjust the pedestal).
These parts become darker when a negative setting is selected and,
conversely, lighter when a positive setting is selected.
Factory settings:
0
Detail [Off, On]
Turn on/off the contour (sharpness of images) adjustment of images.
Factory settings:
On
Master Detail [–31 to +31]
Adjust the contour correction level (master).
This is only enabled when [Detail] is set to [On].
Factory settings:
0
Detail Coring [0 to 60]
Set the level of the signal (including noise) which makes the detail
effect not work.
This is only enabled when [Detail] is set to [On].
Factory settings:
15
V Detail Level [–7 to +7]
Adjust the contour correction level in the vertical direction.
This is only enabled when [Detail] is set to [On].
Factory settings:
0
114
115
Web screen configurations (continued)
