z
Add user
User name [1 to 32 characters]
The user name is input here.
The setting is confirmed with the [Set] button.
• The following characters can be displayed.
Numeric characters
0123456789
Alphabetical characters (upper
and lower cases)
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Symbols
! $ % ´ ( )
*
+ , - . / = ? @ [ ] ^ _ ` { } ˜
Password
Retype password [4 to 32 characters]
The password is input here.
The setting is confirmed with the [Set] button.
Access level [1.Administrator, 2.Camera control]
Select the user access level.
The setting is confirmed with the [Set] button.
1.Administrator
This access level allows the user to perform all
the unit’s operations.
2.Camera control
This access level allows only live screen [Live]
operations to be performed.
Factory settings:
1.Administrator
z
Delete user
Delete the user accounts registered in the unit.
You can delete selected users by clicking the [Delete] button at the right.
Host authentication screen [Host auth.]
Click the [Host auth.] of User management screen [User mng.].
Configure the host authentication settings that restrict the personal
computers (IP addresses) that can access the unit.
z
Setting status
Host auth.
The host authentication settings are displayed.
Host IP address
The host IP address is displayed.
Access level
The host access level is displayed.
z
Mode
Host auth. [Off, On]
Host authentication is set to [On] or [Off] here.
The setting is confirmed with the [Set] button.
Factory settings:
Off
124
125
Web screen configurations (continued)
