Panasonic AW?HE60SE Operating Instructions Manual Download Page 104

Page: 104 / 118

104

System log displays

NTP‑related error displays

Category

Display

Description of error

Connection error

No response from the NTP server.



The IP address of the server may be incorrect.
Check the server’s IP address settings again.



The NTP server may be down.
Consult your server administrator.

Internal error

Undefined error.



A problem has occurred in the NTP function.
Check the NTP settings again.

Successful
NTP-based time
synchronization

NTP update succeeded.



The time has been updated successfully.

Login‑related displays

Category

Display

Description of error

(User name or IP address)



If user authorization has been set, the name of the user who
has logged onto the unit is displayed.



If host authorization has been set, the IP address of the user
who has logged onto the unit is displayed.

Summary of Contents for AW?HE60SE























































































































Search results

Summary of Contents for AW?HE60SE

Reviews:

Related manuals for AW?HE60SE

Brands by name

Popular brands

Panasonic AW?HE60SE, Operating Instructions Manual

Search results

Summary of Contents for AW?HE60SE

Reviews:

Related manuals for AW?HE60SE

Brands by name

Popular brands