Panasonic AW-HE145WP Operating Instructions Manual Download

Page: 95 / 156

RTMP

Make RTMP/RTMPS transmission settings.

Server setup

The setting is confirmed with the [Set] button.

<NOTE>

• Switch to the appropriate method of registering RTMP/RTMPS

transmission server information suited to the setting information

notified from the RTMP/RTMPS transmission server you are using.

• The Stream Key setting field is displayed only when [Type2] is set.

URL type [Type1, Type2]

Select the method for registering the information for the RTMP/

RTMPS transmission server.

Type1

Specify to set the server URL and RTMP/RTMPS stream

key as a set in [Server URL].

Type2

Specify to individually set the server URL and RTMP/

RTMPS stream key in [Server URL] and [Stream Key].

URL

Server URL

Set the URL for the RTMP/RTMPS server to be transmitted to.

Stream key

The stream key obtained from the RTMP/RTMPS server is set

during streaming only when the service is set to [Type2].

Streaming format

Make settings for H.264 images for use in RTMP/RTMPS

transmission.

The setting is confirmed with the [Set] button.

Refer to the explanation for H.264 (→ page 92) for information

about Image capture size, Frame rate and Max bit rate(per client).

<NOTE>

• Streaming format settings cannot be changed during RTMP/RTMPS

transmissions.

• Set the Streaming format to the settings recommended for the

transmission destination server. Visit the publisher’s website or

contact them about the recommended values.

Web screen configurations (continued)

Summary of Contents for AW-HE145WP





























































































































































Search results

Summary of Contents for AW-HE145WP

Reviews:

Related manuals for AW-HE145WP

Brands by name

Popular brands

Panasonic AW-HE145WP, Operating Instructions Manual

Search results

Summary of Contents for AW-HE145WP

Reviews:

Related manuals for AW-HE145WP

Brands by name

Popular brands