background image

Preset 2/2 screen

    Preset 2/2 

 Preset Thumbnail Update        On

 Preset Name                 Reset

 Preset Iris                   Off

 Preset Zoom Mode           Mode A

 Freeze During Preset          Off 

 

 

 

 Return

Preset Thumbnail Update [Off, On]

Turn off/on the function for registering the still image (thumbnail) for 

the images being output when a preset memory is registered.

When set to [On], the still image (thumbnail) for the images being 

output is registered when registering a preset memory.

When set to [Off], the still image (thumbnail) for the images being 

output is not registered when registering a preset memory, but rather 

the still image (thumbnail) previously registered is maintained.

<NOTE>

• When the IP for [OSD Mix] is [On], the menu screen is included in 

the thumbnails.

• When uploading Camera(ALL) or Camera(SYSTEM) on the web 

screen or other access, the still image (thumbnail) that has been 

registered in preset memory will be erased. (→ page 132)

Preset Name [Reset, Hold]

When registering a preset memory, set whether to reset the 

previously registered preset name or keep it.

Reset

When registering a preset memory, reset the 

previously registered preset name.

The preset name after resetting will be [Preset

***

]. 

(

***

 is a 3 digit preset number: 001 to 100)

Hold

When registering a preset memory, keep the 

previously registered preset name.

<NOTE>

• The factory default setting for the preset name is [Preset

***

]. (

***

 is 

a 3 digit preset number: 001 to 100)

• The registration of preset names can be done in the web browser.  

0 to 9, A to Z, a to z, _ , and space

Preset Iris [Off, On]

When the preset memory is played back, set whether the 

reproduction of the values in the various menus related to Iris is off/

on.

When set to [On], the values set in the various menus below are 

reproduced when preset memory is played back.

- Picture Level

- Iris Mode

- Auto Iris Speed

- Auto Iris Window

- Auto Iris Close Limit

<NOTE>

• Its setting takes effect when [Mode A] or [Mode B] has been 

selected as the [Preset Scope] setting.

Preset Zoom Mode [Mode A, Mode B]

Select the zoom operation for when preset memory is recalled.

Mode A

Perform the zoom operation in line with the pan/tilt 

operation.

Mode B

Perform the zoom operation quicker than the pan/tilt 

operation.

Freeze During Preset [Off, On]

Turn the function for freezing images during preset playback off/on.

When this is set to [On], preset playback is performed with a still of 

the image immediately preceding the start of preset playback being 

output. The image freeze is released when preset playback is finished.

Return

Return to the previous menu level.

62

Camera menu items  (continued)

Summary of Contents for AW-HE145WP





























































































































































Reviews: