Panasonic AW-HE145WP Operating Instructions Manual Download

Page: 75 / 156

Switching between the Live screen [Live] and

Web setup screen [Setup]

When the live screen [Live]

displayed, click the [Setup] button

at the top of the

live screen [Live].

For details on the web setup screen [Setup], see “Web setup screen

[Setup]” (→ page 81).

When the web setup screen [Setup]

displayed, click the [Live] button

at the top of the web

setup screen [Setup].

For details on the live screen [Live], see “Live screen [Live]”

(→ page 76).

<NOTE>

• During Standby mode, the [Setup] button is disabled, and you cannot

switch to the web setup screen [Setup].

• If the unit is switched to Standby mode from another terminal while the

web setup screen [Setup] is displayed, the display will switch to the

live screen [Live] after a few seconds.

Logging into the Web screen

When user authentication is enabled

When displaying the live screen [Live]

You need to enter account information for a user with Camera control

or Administrator privileges.

When displaying the web setup screen [Setup]

You need to enter account information for a user with Administrator

privileges.

When user authentication is disabled

When displaying the live screen [Live]

It is not necessary to enter account information.

When displaying the web setup screen [Setup]

You need to enter account information for a user with Administrator

privileges.

<NOTE>

• The account input screen is displayed in a pop up screen from your

web browser.

• Correctly enter the user name and password that has already been

registered.

• It is recommended that the password be changed at regular intervals.

• During Standby mode, the [Setup] button is disabled, and you cannot

switch to the web setup screen [Setup].

Displaying the web screen (continued)

Summary of Contents for AW-HE145WP





























































































































































Search results

Summary of Contents for AW-HE145WP

Reviews:

Related manuals for AW-HE145WP

Brands by name

Popular brands

Panasonic AW-HE145WP, Operating Instructions Manual

Search results

Summary of Contents for AW-HE145WP

Reviews:

Related manuals for AW-HE145WP

Brands by name

Popular brands