Panasonic AW-HE145WP Operating Instructions Manual Download

Page: 67 / 156

Error Status screen

Error Status

Lens No Error

Pan/Tilt No Error

Fan No Error

Temperature No Error

Return

Lens [No Error, Error]

This displays the error status of the lens.

No Error

The lens is operating normally.

Error

A lens error has occurred.

Pan/Tilt [No Error, Error]

This displays the error status of the pan-tilt drive section.

No Error

The pan-tilt drive section is operating normally.

Error

A pan-tilt drive section error has occurred.

Fan [No Error, Error]

This displays the error status of the fan.

No Error

The fan is operating normally.

Error

A fan error has occurred.

Temperature [No Error, High Temperature, Sensor Error]

This displays the status of temperature related errors.

No Error

Within normal operating temperature range.

High

Temperature

Temperature is high.

Sensor Error

The temperature sensor may have malfunctioned.

<NOTE>

• When the above errors occur, notification of the errors are sent via

IP/serial to the external device (AW-RP150 or AW-RP60, etc.), so

these errors can be displayed on the external device.

Return

Return to the previous menu level.

Camera menu items (continued)

Summary of Contents for AW-HE145WP





























































































































































Search results

Summary of Contents for AW-HE145WP

Reviews:

Related manuals for AW-HE145WP

Brands by name

Popular brands

Panasonic AW-HE145WP, Operating Instructions Manual

Search results

Summary of Contents for AW-HE145WP

Reviews:

Related manuals for AW-HE145WP

Brands by name

Popular brands