8
[IRIS] indicator
Lights when the iris is selected with the [DISP] button.
Status displays
Off:
IRIS and Master pedestal can be controlled.
Flashing
red:
Due to iris adjustment from another device, the adjustment value and the IRIS
lever position do not match.
n
If you adjust the IRIS lever to match the iris position of the camera while viewing the iris
gauge that appears at the bottom of the LCD panel (status screen), the button will turn
off and normal control will be possible.
ヤ
パ
A
B
A.
IRIS position of the camera
B.
IRIS lever position
n
This also flashes if the camera adjustment values and IRIS lever position are offset
when the control target camera is switched. At the point in time when the IRIS lever is
moved to the position that matches the camera adjustment values, the button turns off
and normal control becomes possible.
9
[GAIN] indicator
Lights when the master gain is selected with the [DISP] button.
Status displays
Lit green:
Standard position set in the ROP menu.
Lit orange:
Updated from the standard position set in the ROP menu.
n
The standard position of the master gain can be set in [ROP SETTING] > [STD
POSITION M.GAIN] in the ROP menu.
“STD POSITION M.GAIN” (see page 113)
10
[PED] indicator
Lights when the master pedestal is selected with the [DISP] button.
Status displays
Lit
green:
Master pedestal can be controlled.
Flashing
red:
The camera's adjustment value and the master pedestal dial's position do not
match.
When the master pedestal dial is moved to the position that matches the cam-
era's adjustment values, the indicator turns off and normal control becomes pos-
sible.
11
[SHT] indicator
Lights when the shutter is selected with the [DISP] button.
12
[SYNC] indicator
Lights when the sync shutter is selected with the [DISP] button.
“03 SHUTTER SPEED” (see page 65)
13
[DISP] button
Select from the ND filter, CC filter, iris, master gain, master pedestal, shutter, or sync shutter
as the target item for adjustment.
14
[UP (FREE)] button
When the button is lit, you can use it to adjust the function selected with the [DISP] button in
the "plus" direction.
When the [IRIS] indicator is lit, this locks or unlocks the iris lever.
When the button is unlit, you use it with the [PANEL LOCK] button to perform partial lock.
When the [UP (FREE)] button and [SEL] dial are pressed simultaneously, the camera is selec-
ted and the camera number appears in the adjustment value display.
In this state, you can select the camera number using the [SEL] dial.
Selection is possible while the button is flashing, and the selection is confirmed by pressing
the [SEL] dial.
15
[DOWN (CHARA)] button
When the button is lit, you can use it to adjust the function selected with the [DISP] button in
the "minus" direction.
When the button is unlit, you can use it to turn the status screen on/off on the CCU's picture
monitor (PM), or use it to go to the next page.
16
[LOCK] indicator
Lights when a function is locked with the [SEL] dial.
- 30 -
Parts and their functions
