7
[KNEE] button
Use this button to display the knee menus.
The menus will switch with each press of the button.
[KNEE]
[WHITE CLIP]
menu off (status screen)
“17 KNEE” (see page 80)
“18 WHITE CLIP” (see page 81)
Status displays
Lit
green:
The current value matches that configured in the reference file.
Lit
red:
The current value does not match that configured in the reference file.
Off:
Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
n
Use the [REF.RECALL] button to load a reference file.
The reference file settings will be applied to the CCU settings.
n
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
8
[DTL] button
Use this button to display the HD detail and UHD detail menus.
The button functions will switch with ROP menu setting.
When the [ROP SETTING] > [DTL BUTTON] setting is “HD”:
Use this button to display the HD detail menus.
The menus will switch with each press of the button.
[HD DETAIL]
[HD SKIN TONE DTL]
[DNR]
menu off (status screen)
“20 HD DETAIL” (see page 83)
“23 HD SKIN TONE DTL” (see page 88)
“28 DNR” (see page 98)
When the [ROP SETTING] > [DTL BUTTON] setting is “UHD”:
Use this button to display the UHD detail menus.
The menus will switch with each press of the button.
[UHD DETAIL]
[UHD SKIN TONE DTL]
[DNR]
menu off (status screen)
“21 UHD DETAIL” (see page 85)
“24 UHD SKIN TONE DTL” (see page 90)
“28 DNR” (see page 98)
When the [ROP SETTING] > [DTL BUTTON] setting is “SD”:
Use this button to display the SD detail menus.
The menus will switch as follows with each press of the button.
[SD DETAIL]
[DNR]
menu off (status screen)
“22 SD DETAIL” (see page 87)
“28 DNR” (see page 98)
Status displays
Lit
green:
The current value matches that configured in the reference file.
Lit
red:
The current value does not match that configured in the reference file.
Off:
Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
n
Use the [REF.RECALL] button to load a reference file.
The reference file settings will be applied to the CCU settings.
n
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
- 27 -
Parts and their functions
