Item
Setting details
FORMAT
Set the camera format. When the unit is connected to a CCU, this item is only displayed and cannot be
changed.
TALK OFF INCOM1
Sets TALK for INCOM1 to OFF.
TALK OFF INCOM2
Sets TALK for INCOM2 to OFF.
MIC1 GAIN
Makes coarse adjustments of the MIC1 gain.
MIC1 LINE LV
Adjusts the level for input to the camera's <MIC 1> connector.
MIC1 AMP
Makes fine adjustments of the MIC1 gain.
(1 dB increments)
MIC2 GAIN
Makes coarse adjustments of the MIC2 gain.
MIC2 LINE LV
Adjusts the level for input to the camera's <MIC 2> connector.
MIC2 AMP
Makes fine adjustments of the MIC2 gain.
(1 dB increments)
SHOOTING MODE
Sets the shooting mode.
CAM FAN
Sets the camera's cooling fan operation.
TALLY GUARD
When set to ON, this function disables automatic ASU, AWB, ABB operation while the tally is ON.
ASU FILTER
Sets the operation of the ND/CC filter when auto setup is started.
REF
The filter stored in the reference file is used when operation starts.
CURRENT
Auto setup starts at the filter position made prior to startup.
ASU MODE
Selects the auto setup mode setting.
ASU M. PED TARGET
Sets the position where the master pedestal is to be converged when auto setup is started.
REF.RECALL
Sets the reference file that is recalled when the [REF. RECALL] button is pressed.
CABLE CONNECT
Displays the CCU connection cable setting. You can change the setting via menu operations on the cam-
era itself.
HYBRID
Indicates that the CCU is connected via an optical fiber multi cable.
FIBER
Indicates that the CCU is connected via an optical fiber cable.
HEAD PW
Use this button to control camera power remotely. However, control will not be possible unless the CCU
and the camera are turned on.
Each press of the button turns the power of the camera on or off.
VF PW
Use this button to control the viewfinder power remotely. When the camera is turned on by the unit, the
viewfinder is also turned on.
Each press of the button turns the power of the viewfinder on or off.
CTRL ROTATION
A mode that operates based on the numerical value and a mode that operates based on the effect are
available. For details, refer to the operating instructions of the camera.
TALLY CONTROL
Sets whether or not to notify the camera when there is a tally input from the <PREVIEW> connector.
When this set to “ON”, notification is sent if there is a tally input when the camera set in [TALLY INPUT] is
selected.
This is enabled when other than “Serial”, “LAN”, “Serial(AK)”, and “LAN(AK)” is set in [CONNECT
SETTING].
TALLY INPUT
Sets the camera to be notified of a tally input when [TALLY CONTROL] is set to “ON”.
This is enabled when other than “Serial”, “LAN”, “Serial(AK)”, and “LAN(AK)” is set in [CONNECT
SETTING].
- 106 -
ROP menu
