Item
Setting details
FORMAT
Selects the format that is output from the CCU.
The CCU specifies the format to the camera based on the format selected here.
RETURN1 SELECT
Sets the input allocations of return signal 1.
RETURN2 SELECT
Sets the input allocations of return signal 2.
RETURN3 SELECT
Sets the input allocations of return signal 3.
RETURN4 SELECT
Sets the input allocations of return signal 4.
RETURN FS
Set the delay mode for the HD return signals.
CAMERA NUMBER
Changes the camera number controlled by the CCU.
D/C MODE
Selects the down-conversion system for video output from SD SDI and VBS.
U/C MODE
Selects the video up-conversion system used for SD SDI and VBS return videos.
BARS HD
Specifies the HD color bar output by the CCU.
BARS SD
Specifies the SD color bar output by the CCU.
C/B SETUP
Set the SD signal output for use with color bar output.
The “SETUP7.5%” setting is not valid when “SD_SDI” is selected.
SDI8 OUT
Performs PM/NORMAL switching for SDI8 OUT.
HD H COARSE
Make the coarse setting of the H_FINE phase used with GL HD REF.
HD H FINE
Make the fine setting of the H_FINE phase used with GL HD REF.
SD H COARSE
Make the coarse setting of the H_FINE phase used with GL SD REF.
SD H FINE
Make the fine setting of the H_FINE phase used with GL SD REF.
SD-HD V
Set the vertical phase used with down-convert SD REF.
When the [24PsF GL MODE] setting for the CCU is “NORMAL”, this is fixed to “0H”.
When the [24PsF GL MODE] setting for the CCU is “ADVANCE”, this is fixed to “0H_SD_DLAY”.
With 1080/59.94i(24P), this is fixed to “0H”.
SCH
Adjust the SCH phase of VBS output.
CABLE CONNECT
Displays the camera connection cable setting. You can change the setting via menu operations on the CCU
itself.
HYBRID
Indicates that the camera is connected via an optical fiber multi cable.
FIBER
Indicates that the camera is connected via an optical fiber cable.
FORMAT MODE(push)
Selects the CCU format mode.
- 108 -
ROP menu
