Panasonic AJ-PX5000G Operating Instructions Manual Download Page 247

Page: 247 / 260

– 247 –

Chapter 10 Maintenance and Inspection — Warning system

Viewfinder

The [FAN STOPPED] display is illuminated at all times.

Alarm

Does not sound.

Warning content

There is an error in the fan and it stops. Otherwise [OPTION MENU]

→

[OPTION]

→

[FAN MODE]

→

[OFF] has been

set.

Recording or playback operation

Operation will continue, but if the camera is operated with the fan stopped, the temperature rises and recording/playback

may not operate normally.

Action to take

If the fan has stopped with error, stop using immediately and consult your dealer.

If the fan has stopped, temperature of the camera will rise. Therefore, do not use the camera for a long period of time.

Use the tripod, etc., and do not touch the camera directly.

Error code

If errors occur on the camera for any cause, the following error code is displayed on the time code display in the display window. Check the types of
warning, and deal with the error according to “Warnings description list” (page 245).

Code No.

Message display

Description

Type of warning

First row

Second row

[E-30]

[TURN POWER OFF]

[P2 CARD]

P2 card removal error

Card removal error

[E-31]

[TURN POWER OFF]

[SYSTEM MODE]

System mode error

Mismatched format

[E-33]

[SYSTEM ERROR]

[CAMERA]

Camera unit error

System error

[E-34]

[SYSTEM ERROR]

[LCD MICON]

LCD microcomputer error

System error

[E-35]

[SYSTEM ERROR]

[CODEC]

Codec control error

System error

[E-36]

[SYSTEM ERROR]

[P2 SYSTEM]

P2 system error

System error

[E-37]

[SYSTEM ERROR]

[P2CS]

P2CS microcomputer error

System error

[E-39]

[SYSTEM ERROR]

[INITIALIZE]

Video initialization error

System error

[E-63]

No display

System control microcomputer error

System error

[E-64]

[SYSTEM ERROR]

or no display

[FRAME SIGNAL]

or no display

Standard signal error

System error

Warning information display

Monitor display

Description

Camera operation

First row

Second row

[AUTH NG CARD] (slot

number)

None

CPS authentication of microP2 memory card has failed. The microP2

memory card whose CPS authentication failed cannot be recorded

or played back. Select [AUTHENTICATE] in the main menu

→

[CLIP], and enter the password. For details, refer to “Manual CPS

authentication” (page 137).

Continue

[BACKUP BATT EMPTY]

None

Displays any reduced voltage detected on the backup battery in the

internal clock when the power is turned on.

Follow “Charging the built-in battery” (page 244) to charge the

battery.

Continue

[CARD ERROR] (slot

number)

None

Displayed when an data error caused by the P2 card occurs during

recording.

Displayed after recording stops until the next operation. Also

displayed for three seconds during playback when a P2 card error

causes playback to stop.

Replace the P2 card of the slot where the error occurred.

Stop

[CLIP DISCONTINUED]

None

Displayed when clips cannot be linked with the subsequent recording

operations due to the inconsistency as linked clips during recording in

one-clip recording mode.

Continue

[DIR NG CARD] (slot

number)

None

The directory position is not correct. Make a card backup immediately

and use again after formatting.

Continue

[FAN STOPPED]

None

Displayed when the fan motor stops.

The camera operates even if the fan stops. Refrain from using

immediately.

Continue

[PB INTERMITTENT]

(slot number)

None

Playback is interrupted on the SDHC/SDXC memory card. A card

whose playback performance cannot be assured is inserted. Use of

microP2 or P2 memory card is recommended.

Continue

[PROXY ERROR]

None

Proxy error

For details, refer to “Error displays about proxy data recordings”

(page 47).

Continue

[PROXY REC

WARNING]

None

Proxy error

For details, refer to “Error displays about proxy data recordings”

(page 47).

Continue

[REC IMPOSSIBLE] (slot

number)

None

An SDHC/SDXC memory card is inserted into the microP2 memory

card slot.

Recording to the SDHC/SDXC memory card is disabled. Record to

microP2 or P2 memory cards.

Continue

Summary of Contents for AJ-PX5000G





































































































































































































































































Search results

Summary of Contents for AJ-PX5000G

Reviews:

Related manuals for AJ-PX5000G

Brands by name

Popular brands

Panasonic AJ-PX5000G, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX5000G

Reviews:

Related manuals for AJ-PX5000G

Brands by name

Popular brands