Panasonic AJ-PX5000G Operating Instructions Manual Download Page 161

Page: 161 / 260

– 161 –

Chapter 7 Menu Operations — Menu list

Item

Description of settings

[DATE/TIME]

Selects whether year/month/day and hour/minute/second are displayed simultaneously when the camera

ID is displayed.

[ON], [OFF]

Factory setting: [OFF]

This item cannot be set when [CAMERA ID] is set to [OFF].

[ZOOM/FOCUS]

Selects the unit of zoom and focus values.

[NUMBER]:

Displays position values of zoom and focus from [0] to [99].

[mm/m]:

Zoom is displayed in units of millimeters, and focus in units of meters.

[mm/feet]:

Zoom is displayed in units of millimeters, and focus in units of feet.

[OFF]:

Neither zoom nor focus is displayed.

Factory setting: [NUMBER]

[mm/m] or [mm/feet] is displayed only when a serial lens is attached.

[SYSTEM MODE]

Turns system mode display [ON]/[OFF].

[ON], [OFF]

Factory setting: [OFF]

[REC FORMAT]

Turns recording format display [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[CAMERA MODE]

Turns camera mode display [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[COLOR TEMP]

Turns color temperature display [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[CAC]

Turns chromatic aberration compensation display [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[GAMMA MODE]

Turns gamma curve display [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[DRS]

Turns display of [DRS], which indicates that dynamic range stretcher function is operating, [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[FBC]

Turns display of [FBC], which indicates that flash band compensation function is operating, [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[FBC WARNING DISP]

Sets the warning display for flash band compensation.

[BOTH]:

Displays the warning for both [FBC OFF] and [SHUTTER].

[1[FBC OFF]]:

Displays the warning when flash band is detected while the flash band compensation

function is not active.

[2[SHUTTER]]:

Displays the warning when the flash band compensation function and shutter display are

both set to [ON].

[OFF]:

Disables the warning display.

Factory setting: [OFF]

[SHOOTING MODE]

Turns the display of [H.SENS.] [ON]/[OFF], which indicates that the main menu

→

[PAINT]

→

[[S]

CAMERA SETTING]

→

[SHOOTING MODE] is set to [HIGH SENS.].

[ON], [OFF]

Factory setting: [ON]

[FOCUS BAR]

Turns the function that displays the degree of focus at bar size [ON]/[OFF].

[ON], [OFF]

Factory setting: [OFF]

[P2CARD REMAIN]

Turns display of the remaining recording capacity for the P2 card [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[REC MEDIA]

Select [ON]/[OFF] of the display of selection status for recordable media (P2/microP2).

[ON], [OFF]

Factory setting: [ON]

[BATTERY]

Turns battery voltage display [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[AUDIO LVL]

Turns audio level meter display [ON]/[OFF].

[ON], [OFF]

Factory setting: [ON]

[TC ON COLOR BAR]

Selects whether to display time code when color bars are displayed.

[ON], [OFF]

Factory setting: [OFF]

[TC]

Selects a time code to display.

[TCG]:

Displays the time code generator value during recording.

[TCR]:

Displays the time code reader value during playback.

[TCG/TCR]:

Displays the time code generator value during recording and the time code reader value

during playback.

[OFF]:

Does not display the time code.

Factory setting: [OFF]

Summary of Contents for AJ-PX5000G





































































































































































































































































Search results

Summary of Contents for AJ-PX5000G

Reviews:

Related manuals for AJ-PX5000G

Brands by name

Popular brands

Panasonic AJ-PX5000G, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX5000G

Reviews:

Related manuals for AJ-PX5000G

Brands by name

Popular brands