Panasonic AJ-PX5000G Operating Instructions Manual Download Page 176

Page: 176 / 260

– 176 –

Chapter 7 Menu Operations — Menu list

Item

Description of settings

[INITIALIZE]

Deletes all loaded metadata and initializes.

[PROPERTY]

Checks and corrects loaded metadata.

This item is enabled while the thumbnail is displayed.

[LANGUAGE]

Sets the language used to display metadata.

[ENGLISH], [JAPANESE]

Factory setting: [JAPANESE]

This items is displayed when [NTSC (J)] is selected in [OPTION MENU]

→

[AREA SETTING].

[I/F SETUP]

These are items for setting related to audio and video input/output and display, and setting battery, audio, video output, etc.

[OUTPUT SEL]

Item

Description of settings

[OUTPUT ITEM]

Sets the character content to superimpose on the output signal of the <SDI OUT1> terminal and monitor

output terminal (<SDI OUT2>, <HDMI OUT>, and <VIDEO OUT>).

[MENU ONLY]:

Displays only on the menu. Normally, nothing is displayed.

[TC]:

Displays the time code. (Menu is displayed on the menu)

[STATUS]:

Displays all items that are the same as the characters displayed on the viewfinder. (Menu is

displayed on the menu)

Factory setting: [MENU ONLY]

The time code display position moves up and down based on the camera ID position.

[SDI OUT1]

Turns <SDI OUT1> terminal output [ON]/[OFF].

[ON]:

Performs output.

[OFF]:

Stops output.

Factory setting: [ON]

[SDI OUT1 MODE]

Selects <SDI OUT1> terminal output signals.

[MEM]:

In playback mode, these are playback images.

[CAM]:

When the main menu

→

[SYSTEM]

→

[SYSTEM MODE]

→

[REC SIGNAL] is set to [CAM], output

is always camera images.

Factory setting: [MEM]

[SDI OUT1 CHAR]

Selects whether to superimpose characters on <SDI OUT1> terminal output images.

[ON]:

Superimposes.

[OFF]:

Does not superimpose.

Factory setting: [OFF]

The content of characters to superimpose is the same as the characters superimposed on images output

from <SDI OUT2> and other terminals.

[SDI OUT2]

Turns <SDI OUT2> terminal output [ON]/[OFF].

[ON]:

Performs output.

[OFF]:

Stops output.

Factory setting: [OFF]

[VIDEO OUT]

Turns <VIDEO OUT> terminal output [ON]/[OFF].

[ON]:

Performs output.

[OFF]:

Stops output.

Factory setting: [OFF]

[SDI2/HDMI OUT]

Selects the signal form to be output to the monitor output terminal (<SDI OUT2> or <HDMI OUT>) in HD

mode.

[SYSTEM MODE]:

Outputs in the system mode signal format.

[DOWNCON]:

Outputs the down converter signal.

Factory setting: [SYSTEM MODE]

[1080P SDI2/HDMI OUT]

Selects whether to convert the output signal of the monitor output terminal (<SDI OUT2> or <HDMI OUT>)

to 1080i when in 1080P mode.

[1080P]:

Outputs as 1080P.

[1080i]:

Converts to 1080i and outputs.

Factory setting: [1080P]

If the main menu

→

[I/F SETUP]

→

[OUTPUT SEL]

→

[SDI2/HDMI OUT] is set to [DOWNCON], the signal

that was down-converted is output, regardless of these settings.

[3G-SDI OUT]

Selects 1080P signals of the HD SDI output in 1080P mode.

[LEVEL-A]:

Selects the LEVEL-A method.

[LEVEL-B]:

Selects the LEVEL-B DL method.

Factory setting: [LEVEL-B]

[MONITOR OUT MODE]

Selects the output signals of the monitor output terminal (<SDI OUT2>, <HDMI OUT> or <VIDEO OUT2>).

Operates independently of the <SDI OUT1> terminal.

[MEM]:

In playback mode, these are playback images.

[CAM]:

When the main menu

→

[SYSTEM]

→

[SYSTEM MODE]

→

[REC SIGNAL] is set to [CAM], output

is always camera images.

Factory setting: [MEM]

[MONITOR OUT ZEBRA]

Selects whether the zebra pattern is superimposed over the output video signals from the monitor output

terminals (<SDI OUT2>, <HDMI OUT>, and <VIDEO OUT>). (The remote VBS signal also interlocks.)

[ON]:

Superimposes.

[OFF]:

Does not superimpose.

Factory setting: [OFF]

Summary of Contents for AJ-PX5000G





































































































































































































































































Search results

Summary of Contents for AJ-PX5000G

Reviews:

Related manuals for AJ-PX5000G

Brands by name

Popular brands

Panasonic AJ-PX5000G, Operating Instructions Manual

Search results

Summary of Contents for AJ-PX5000G

Reviews:

Related manuals for AJ-PX5000G

Brands by name

Popular brands