– 86 –
Chapter 4 Adjustments and Settings for Recording — Viewfinder status display
[A]
The <WHITE BAL> switch is set to <A>.
[B]
The <WHITE BAL> switch is set to <B>.
[P]
The <WHITE BAL> switch is set to <PRST>.
[T]
The switch is set to [ATW]. Note, however, that this flashes when brightness and color are outside the operation range.
14 Dynamic range stretcher (DRS) function display
[DRS]
Displayed when the image level in high-brightness areas is compressed and the dynamic range is stretched.
15 Incremental gain display
Displays the value when incremental gain is functioning.
[6
↑
]/[10
↑
]/[12
↑
]/[15
↑
]/[20
↑
]/[24
↑
]/[28
↑
]/[34
↑
]
16 Gain display
Displays the gain value of the image amplifier configured.
[
**
dB]
Displays the current gain value.
[AGC]
Displayed when auto gain control is active.
17 System information and warning
[SYSTEM ERROR
E-
**
]
Displayed when an abnormality in internal microcomputer communication or the reference signal has occurred. From here on,
recording and playback are not possible. The error code is displayed on
**
. For details, refer to “Error code” (page 247).
[TURN POWER OFF
E-
**
]
Displayed when operation is no longer possible after P2 card is removed during accessing of the P2 card, for example, during
recording/playback or formatting. The error code is displayed on
**
.
[TEMPORARY PAUSE
IRREGULAR SIG]
Displayed when the reference signal is disrupted and recording is suspended during generator lock input, etc.
[EOM]
Displayed when there is no space remaining on the P2 card.
[BOS]
Displayed when the playback position is at the beginning of all clips.
[EOS]
Displayed when the playback position is at the end of all clips.
[CANNOT REC]
Displayed when recording to the P2 card is not possible, for example, immediately after power is turned on or the P2 card is
[CANNOT PLAY]
Displayed when playback is not possible, for example, when there are no clips on the P2 card or the P2 card is not inserted.
[TEXT MEMO]
Displayed when a text memo is recorded.
[TEXT MEMO INVALID]
Displayed when a text memo could not be recorded.
[MARK ON/OFF]
[SHOT MARK INVALID]
Displayed when shot marks cannot be added.
[UPDATING]
Displayed when playback operation is not accepted during updating of the clip information for playback.
[USB DEVICE]
Displayed when the USB device mode is set. Flashes during migration through modes, and after migration through modes
is completed, [CONNECTED] is displayed when communication is possible and [DISCONNECTED] is displayed when
communication is not possible.
[USB STORAGE]
Displayed when the USB storage mode is set. Flashes during migration through modes, and from then on, [CONNECTED]
is displayed when the external hard disk is recognized successfully and [DISCONNECTED] is displayed when it cannot be
recognized.
[THUMBNAIL OPEN]
Displayed during thumbnail operation.
[TC REGEN]
Displayed when the <RET> button on the lens is pressed to regenerate to the time code of the last recorded clip to the P2 card.
[SLOT SELECT]
Lights up when the <USER> button assigned with [SLOT SEL] is pressed to start the process of switching the recording slot of
the P2 card.
[SLOT SEL INVALID]
Displayed when the <USER> button assigned with [SLOT SEL] is pressed and switching processing of the recording slot on the
P2 card is not possible.
[REC PAUSE INVALID]
Displayed when recording cannot be paused, if recording resumes during recording completion process. This warning disappears
when recording completion process ends, and recording can be paused.
[START ON]
Displayed when the transmission of the streaming video from the camera is started by pressing the <USER> button assigned as
[STREAMING START].
[START OFF]
Displayed when the transmission of the streaming video from the camera is stopped by pressing the <USER> button assigned as
[STREAMING START].
[START INVALID]
Displayed when the status of the streaming video from the camera cannot be switched by pressing the <USER> button assigned
as [STREAMING START].
For details on warnings, refer to “Warning information display” (page 247).
18 Time code display
[TCG 12:59:59:20]
Displays the time code generator value.
[TCR 12:59:59:20]
Displays the time code reader value.
[VUBG AB CD EF 00]
([UBG AB CD EF 00])
Displays the user’s bit generator value.
[VUBR 12 34 56 78]
([UBR 12 34 56 78])
Indicates the user’s bit reader value.
[CTL
−
1:59:59:20]
Displays the CTL counter value.
19 Audio input line and level meter display
[----
r
----
+
]
Displays the selected channel and its audio level.