Panasonic AJ-HPM200 Operating Instructions Manual Download Page 85

Page: 85 / 218

Editing: Playlist Function

18.

PLAY/REVIEW button

PLAY button

Use to play back video on the player or recorder.

REVIEW (SHIFT + PLAY) button

Use to review playback of event at the cursor location

or temporarily registered event during recorder

operation.

19.

STILL/PAUSE button

Displays still image on player or recorder. In A.DUB

mode, use this button to enter A.DUB/PAUSE status.

The menu does not open in playback mode. Nor are

the edit buttons available. Press the STOP button to

enable editing.

➝

Refer to “Recording Voice-Overs” (page 102).

20.

REC button

Finalizes an edit operation, registers the event and

displays it on the timeline. Imports video to a P2 card

from an external device (RS-422A) or hard disk used

as the player.

Use the REC + PLAY button during playback in the

A.DUB mode to start voice-over recording.

➝

Refer to “Recording Voice-Overs” (page 102).

21.

PREVIEW/A LEVEL REC buttons

PREVIEW button

Use this button to preview playback of event that is

being registered. Before the preview, the event is

registered and appears on the timeline. When the

player is a P2 card, the level changes made using the

fader operation during a preview are set in a registered

event.

➝

Refer to “Setting Audio Level” (page 105).

◆

NOTE:

• Events created from external devices or hard disks are

indicated in orange as temporarily registered events.

A LEVEL REC (SHIFT + PREVIEW) button

Press this button to enable adjustment of the audio

level with the fader simultaneous with a preview of the

IN and OUT points of the recorder. This mode allows

you to dynamically change the audio level in the event.

➝

Refer to “Setting Audio Level” (page 105).

22.

SHIFT button

This button is used in combination with other buttons.

23.

UNITY/VAR/channel select switches and audio

playback level adjustment fader controls

Use the switches to select channels and the fader

when adjusting audio level during playback or when

recording voice-overs (mixing the original playback

sound with an additional recording).

◆

NOTE:

• Levels cannot be adjusted during playback of a playlist.

Summary of Contents for AJ-HPM200



























































































































































































































Search results

Summary of Contents for AJ-HPM200

Reviews:

Related manuals for AJ-HPM200

Brands by name

Popular brands

Panasonic AJ-HPM200, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPM200

Reviews:

Related manuals for AJ-HPM200

Brands by name

Popular brands