Panasonic AJ-HPM200, Operating Instructions Manual

Page: 155 / 218

Setup: Unit Setup
155
Se
tup
Setup
Unit Setup
The settings for this unit consist of SYSTEM, BASIC, OPERATION, INTERFACE, TIME CODE, VIDEO, AUDIO, DIF and MENU.
The SYSTEM setting values are stored in the SYSTEM file. The other setting values are stored in the user setting file. Up to five
user files (USER1 to USER5) can be saved. These settings (up to 4 files) can be written to and loaded from SD memory cards.
This unit can possess up to five user files, each of which can
be selected from a menu setting.
Setting values can be changed as necessary.
➝
For details on change operations, refer to “Changing
Settings” (page 156).
After a change, the content of USER1 can be saved (copied)
to USER2 to USER5.
➝
For details, refer to “Setup menu No. A01 (SAVE)” (page
181).
SETUP menu settings can be saved to and loaded from an SD
memory card.
➝
For details, refer to “Setup menu No. A10 (CARD READ)
(page 182), A11 (CARD WRITE) (page 182)”.
You can specify the user setting files that will be loaded in
USER1 at power up. You can also decide to use the same
settings as last time.
➝
For details, refer to “Setup menu No. A02 (P.ON LOAD)”
(page 181).
System Basic Operation Interface TimeCode Video Audio DIF Menu
User settings file
System
file
USER1
SHIFT+FF ( a )
SHIFT+REW (
b
)
USER2 USER3 USER4 USER5
SHIFT+FF (
a
) SHIFT+FF (
a
) SHIFT+FF (
a
)
SHIFT+REW ( b ) SHIFT+REW ( b ) SHIFT+REW ( b )
SHIFT+FF (
a
)
SHIFT+REW (
b
)
A10 CARD READ A11 CARD WRITE
SD
memory
card
SHIFT+REW ( b )
SHIFT+FF (
a
)
Automatic Loading of User Setting File at
Power up