Panasonic AJ-HPM200 Operating Instructions Manual Download Page 68

Page: 68 / 218

Clip Management: Using SD/SDHC Memory Cards

Using SD/SDHC Memory Cards

This unit can use SD and SDHC memory to store setup

menus, recorded metadata and AVCHD recordings

*1: Requires AVCHD codec board (optional accessory).

◆

NOTE:

• Further information on the above functions is provided in the

following sections in this manual.

- Loading metadata

➝

Refer to “Attaching Metadata to Clips” (page 64).

- Storing and loading setup menus

➝

Refer to “Setup” (page 155).

- AVCHD recording and playback

➝

Refer to “Using an Optional AVCHD Board” (page 140).

• The SD memory card access lamp lights in orange during AVCHD

recording and playback. It lights in green in the following cases.

- While loading metadata

- While storing and loading the setup menu

- While formatting the card from the P2 card thumbnail screen or

the setup menu

- While reading the SD memory card property information on the P2

card thumbnail screen

Use the following procedure to display SD memory card

status on dialog for checking.

Open the thumbnail screen.

Press the MENU button.

Use the cursor buttons to choose [PROPERTY] –

[DEVICE] – [SD CARD] and press the SET button.

The following information may also appear depending on

card status.

• This unit cannot record proxies.

Press the SET button and the MENU button to end

processing.

Use the following procedure to format an SD memory card

inserted in an SD memory card slot.

Open the thumbnail screen.

Press the MENU button.

Use the cursor buttons to select [OPERATION] –

[FORMAT] – [SD CARD].

Displaying Miscellaneous SD
Memory Card Information

SD STANDARD:

Indicates that an SD memory

card is formatted according to

the SD/SDHC standard.

SUPPORTED: Complies with SD/

SDHC

NOT SUPPORTED: Does not

comply with SD/SDHC

USED:

Used capacity (bytes)

BLANK:

Free space (bytes)

TOTAL:

Total capacity (bytes)

NUMBER OF CLIPS:

The number of clips on an SD

memory card when clips have

been copied to an SD memory

card using a proxy or a P2

camera recorder.

PROTECT:

Write protected

Formatting SD Memory Cards

Summary of Contents for AJ-HPM200



























































































































































































































Search results

Summary of Contents for AJ-HPM200

Reviews:

Related manuals for AJ-HPM200

Brands by name

Popular brands

Panasonic AJ-HPM200, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPM200

Reviews:

Related manuals for AJ-HPM200

Brands by name

Popular brands