Panasonic AJ-HPM200 Operating Instructions Manual Download Page 140

Page: 140 / 218

140

AVCHD Recording and Playback: Using an Optional AVCHD Board

AVCHD Recording and Playback

Using an Optional AVCHD Board

■

What is AVCHD?

AVCHD is a standard for recording and playback of high-vision video. Video is compressed in MPEG-4 AVC/H.264 and audio

is recorded in Dolby digital.

◆

NOTE:

• SD memory cards can only be used for the frequency it was formatted for. The same SD memory card cannot be used for recording both

59.94 Hz and 50 Hz video.

(Compatibility of recorded video)

• AVCHD recorded materials can only be used in AVCHD compatible devices. For details, refer to the Operating Instructions supplied with your

device.

• They cannot be used for playback with incompatible devices (devices not compatible with AVCHD).

• Playback may sometimes not be possible even on AVCHD compatible devices. If this happens, use this unit for playback.

Note the following about AVCHD recording and playback.

• It is recommended to use speed class 2 or better SD

memory cards

and SDHC memory cards

, or the

Panasonic SD memory cards listed to the right. (As of

October 2009)

*1: PH mode and HA mode recording requires class 4 or better cards.

◆

NOTE:

• SDHC memory cards can only be used in SDHC compatible

devices.

(SD speed class 4)

• Indicates class 4 (SD speed class) of the standard that regulates

continuous write speeds between an SD compatible device and an

SD memory card as determined by the SD standard. Use a class 4

or better card for an SD compatible device for which an SD speed

class 4 is recommended to obtain stable recording.

◆

NOTE:

• For the latest information not available in the Operating Instructions,

visit the Support Desk at the following Web site.

For English: https://eww.pavc.panasonic.co.jp/pro-av/

• This unit supports SD memory cards formatted using the FAT12 and

FAT 16 format compatible with the SD standard and SDHC memory

cards formatted using the FAT 32 format.

• This unit supports 4 GB or larger memory cards only if they are

SDHC memory cards.

Cards that are 4 GB or larger without an SDHC logo do not conform

to the SD standard.

SD/SDHC Memory Cards

Card type

Capacity

Recording and

playback

metadata

SD memory

cards

8 MB

16 MB

Cannot be used.

Can be used.

32 MB

64 MB

128 MB

256 MB

Normal operation is

not guaranteed.

Some SD memory

cards may stop

during recording.

512 MB

RP-SDV512

1 GB

RP-SDV01G

RP-SDM01G

RP-SDP01G

2 GB

RP-SDV02G

RP-SDM02G

RP-SDW02G

RP-SDP02G

SDHC

memory

cards

4 GB

RP-SDV04G

RP-SDM04G

RP-SDW04G

RP-SDP04G

Can be used.

6 GB

RP-SDM06G

8 GB

RP-SDV08G

RP-SDM08G

RP-SDW08G

RP-SDP08G

12 GB

RP-SDM12G

RP-SDP12G

16 GB

RP-SDV16G

RP-SDM16G

RP-SDW16G

RP-SDP16G

32 GB

RP-SDV32G

RP-SDW32G

Card type

Capacity

Recording and

playback

metadata

Summary of Contents for AJ-HPM200



























































































































































































































Search results

Summary of Contents for AJ-HPM200

Reviews:

Related manuals for AJ-HPM200

Brands by name

Popular brands

Panasonic AJ-HPM200, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPM200

Reviews:

Related manuals for AJ-HPM200

Brands by name

Popular brands