Panasonic AJ-HPM200 Operating Instructions Manual Download Page 141

Page: 141 / 218

AVCHD Recording and Playback: Using an Optional AVCHD Board

141

CHD

Rec

rdi
n

g a

nd P

bac

• Format SD memory cards on this unit. SD memory cards formatted

on a computer or other device may delay start of recording or may

not be used in this unit.

➝

Refer to “Formatting SD Memory Cards” (page 68).

• MultiMediaCards cannot be used.

Clips recorded on SD memory cards inserted in the SD/SDHC

memory card slot on the AJ-HPM200 can be played back as

thumbnails and video clips corded on P2 cards.

■

Access lamps

Set the write-protect switch to [LOCK] to prevent accidental

deletion of data recorded on an SD card.

Use the thumbnail menu to format SD memory cards.

➝

Refer to “Using SD/SDHC Memory Cards” (page 68).

You can also use the menu in the AVCHD mode for formatting

SD memory cards.

➝

For how to switch to the AVCHD mode, refer to “Switching

to AVCHD mode” (page 144).

Switch to the AVCHD mode and press the MENU

button.

Select [CARD FUNCTIONS] – [CARD FORMAT] and

press the SET button.

Select [YES] in the screen shown below that appears. To

cancel formatting, select [NO].

Select [YES] in the confirmation dialog.

The SD memory card will now be formatted.

Press the MENU button to end processing.

• Check that no important data remains on a card before

formatting since data erased by formatting cannot be

recovered.

Check that the SD memory card access lamp is not

flashing.

Press the center of the SD memory card and remove

it after it bounces back by pulling it outwards.

◆

NOTE:

• Be sure to remove SD memory cards only when the access

lamp is not blinking.

Removing an SD memory card when the access lamps are

blinking could damage the SD memory card or the card slot.

SD memory card slots and access lamps

Steady orange light:

Card is available for reading and

writing.

Flashing orange light

(fast):

Recognition phase to determine

whether the card is defective or not

Flashing orange light

(slow):

Card is being accessed.

Off:

Card is not available for reading and

writing.

No card is inserted, the card has not

been formatted or a non-compatible

card has been inserted.

Write protect status, no free space

left on card

SD memory card protection

Formatting SD memory cards

LOCK

Write-protect switch

Removing SD memory cards

Summary of Contents for AJ-HPM200



























































































































































































































Search results

Summary of Contents for AJ-HPM200

Reviews:

Related manuals for AJ-HPM200

Brands by name

Popular brands

Panasonic AJ-HPM200, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPM200

Reviews:

Related manuals for AJ-HPM200

Brands by name

Popular brands