Panasonic AG-UMR20E Operating Instructions Manual Download Page 239

Page: 239 / 260

- 239 -

Examples of event logs displayed in the system log tab of the maintenance screen in the web screen are shown below.
(

184

)

Display

Event log

Event code

Description

Explanation of the content

W:0001

<Power> Recorder system start.

≥

The system has been started with the Recorder.
(The power supply has started)

W:0002

<Power> Camera head system start.

≥

The system has been started with the Camera
Head.
(The power supply has started after connecting the
unit and the Camera Head)

W:0003

<Power> Recorder power on.

≥

The Recorder has been turned on.

W:0004

<Power> Camera head power on.

≥

The Camera Head has been turned on.

W:0005

<Power> Recorder power off.

≥

The Recorder has been turned off.

W:0006

<Power> Camera head power off.

≥

The Camera Head has been turned off.

W:0007

<Power> Recorder standby.

≥

The Recorder has entered standby mode.

W:0008

<Power> Camera head standby.

≥

The Camera Head has entered standby mode.

W:0009

<Power> Camera head cannot be found.

≥

The Camera Head cannot be detected.

W:0010

<Power> Camera head cannot be used.

≥

The Camera Head cannot be used.

W:0011

<Power> System error. Turn off.

≥

Either the Recorder or both the Recorder and the
Camera Head have been turned off due to a
system error.

W:0012

<Power> The Camera head and Recorder
versions are different.

≥

The versions of the Camera Head and the
Recorder do not match.

W:1001

<Maintenance> Succeeded Recorder
firmware update.

≥

The firmware of the Recorder has been
successfully updated.

W:1002

<Maintenance> Succeeded Camera head
firmware update.

≥

The firmware of the Camera Head has been
successfully updated.

W:1003

<Maintenance> Reset to default (ALL
settings).

≥

The Camera Text Menu or the web screen menu
has been initialized.

W:1004

<Maintenance> Reset to default (SCENE
FILE settings).

≥

The scene file menu has been initialized.

W:1005

<Maintenance> Reset to default (USER
FILE settings).

≥

The user file menu has been initialized.

W:1006

<Maintenance> Reset to default
(NETWORK settings).

≥

The network setup menu has been initialized.

W:1007

<Maintenance> Reset to default (except
NETWORK settings from WEB).

≥

Menus other than the web screen network setup
menu have been initialized.

W:1008

<Maintenance> Reboot.

≥

The unit has rebooted.

W:1009

<Maintenance> Save the USER FILE.

≥

The setting data for [USER FILE] has been saved
successfully.

AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 239 ページ２０１７年５月２２日　月曜日　午後２時１１分

Summary of Contents for AG-UMR20E





































































































































































































































































Search results

Summary of Contents for AG-UMR20E

Reviews:

Related manuals for AG-UMR20E

Brands by name

Popular brands

Panasonic AG-UMR20E, Operating Instructions Manual

Search results

Summary of Contents for AG-UMR20E

Reviews:

Related manuals for AG-UMR20E

Brands by name

Popular brands