Panasonic AG-UMR20E, Operating Instructions Manual

Page: 143 / 260

- 143 -
The settings for the unit are selected on this screen.
≥
The setting menu operations can be performed only by users whose access level is “1. Administrator”.
For the procedure used to set the access level, refer to page
165 .
1 Basic button [Basic]
When the Basic button is pressed, the Basic screen is displayed in the main area.
j “Basic screen [Basic]” ( l 144 )
2 Image/Audio button [Image/Audio]
When the Image/Audio button is pressed, the Image/Audio screen is displayed in the main area.
j “Image screen [Image/Audio]” ( l 148 )
3 Multi-screen button [Multi-screen]
When the Multi-screen button is pressed, the Multi-screen setup screen is displayed in the main area.
j “Multi screen setup screen [Multi-screen]” ( l 163 )
4 User mng. button [User mng.]
When the User mng. button is pressed, the User mng. screen is displayed in the main area.
j “User management screen [User mng.]” ( l 164 )
5 Network button [Network]
When the Network button is pressed, the Network setup screen is displayed in the main area.
j “Network setup screen [Network]” ( l 166 )
6 Maintenance button [Maintenance]
When the Maintenance button is pressed, the Maintenance screen is displayed in the main area.
j “Maintenance screen [Maintenance]” ( l 184 )
7 Power ON button [Power ON]/Standby button [Standby]
When you enter Standby mode, the display will automatically switch to Live mode. In addition, the [Setup] button
in the live screen [Live] will be disabled, and you cannot operate the web setup screen [Setup].
8 Main area
The menu screen is displayed.
Web setup screen [Setup]
Turn the unit on.
Set the unit to Standby mode.
1
8
2
3
4
5
6
7
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 143 ページ ２０１７年５月２２日 月曜日 午後２時１１分