- 186 -
∫
Back up tab [Backup]
On this screen, the unit’s settings can be saved to a
personal computer or settings saved in a personal
computer can be loaded into the unit for use.
Config data type
Specify the type of settings to save when saving the unit’s
configuration data on the personal computer.
Setting value:
Download
Save the unit’s settings onto the personal computer.
When the destination dialog box appears after clicking the [Execute] button, specify the destination folder.
When [Network] is selected in [Config data type], the following settings are saved.
≥
The user file backup items, web screen settings, and network settings of the unit will be saved. Please note that the
web screen settings and network settings will be saved separately for CAM Mode and SDI Mode.
≥
After the [Execute] button is clicked, the amount of time it takes for the destination dialog box to appear is about
20 seconds for a network settings file.
≥
The unit may restart after download of settings files.
≥
Depending on the state of the unit (whether recording to the SD card is in progress), settings file downloading may
not be possible. The unit will also restart automatically in such cases.
Upload
The unit’s setting files, which were saved in the personal computer by the download function, are uploaded.
Click the [Browse] button to display the dialog box, and specify the saved file.
When you click the [OK] button in the message dialog box that appears after you click the [Execute] button, uploading
starts. Another message dialog box appears after uploading is complete. When you click the [OK] button, the unit will
restart automatically.
≥
Use the files downloaded by the unit as the data to be used for uploading.
≥
If the file name of a settings file is changed, it may become impossible to upload.
≥
Do not turn off the unit’s power while downloading or uploading is underway.
≥
Do not attempt to perform any operations while downloading or uploading is underway. Instead, wait until the
downloading or uploading is completed.
≥
It takes about 2 minutes for the upload complete dialog box to appear for the settings files of the Camera Head or
the unit.
Network
≥
Setup content of user file
≥
Network settings
File name
Settings
(During CAM Mode)
AG-UCK20_NSetting.dat
(During SDI Mode)
AG-UMR20_NSetting.dat
Settings of the Web screen
Clock settings
Network settings
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 186 ページ ２０１７年５月２２日 月曜日 午後２時１１分
