Panasonic AG-UMR20E Operating Instructions Manual Download

Page: 129 / 260

- 129 -

Touch [EXIT].

≥

A connection cannot be made unless the combination of the IP address, subnet mask, and gateway are correct.

≥

When not using the gateway, set it to [0.0.0.0].

Icon

Description of operation

[A-a]

Switches between uppercase and lowercase.

[Return]

Returns to the previous screen. The entered characters are
canceled.

[

]

Switches to symbols and numbers.

[

]

Enters a space.

[BS]

Deletes a character.
Deletes the previous character if the cursor is in an empty
space.

Moves the cursor to left or right.

[Enter]

Ends text entry.

AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 129 ページ２０１７年５月２２日　月曜日　午後２時１１分

Summary of Contents for AG-UMR20E





































































































































































































































































Search results

Summary of Contents for AG-UMR20E

Reviews:

Related manuals for AG-UMR20E

Brands by name

Popular brands

Panasonic AG-UMR20E, Operating Instructions Manual

Search results

Summary of Contents for AG-UMR20E

Reviews:

Related manuals for AG-UMR20E

Brands by name

Popular brands