Panasonic AG-HPX500, Service Manual

Page: 73 / 191

DIS-10
9. Removal of CODEC MOTHER and CAMERA C.B.A.
1. Remove the Side Case (R) Ass’y.
2. Remove the Side Case (L) Ass’y.
3. Remove the P2CARD 1 and P2 CARD 2 C.B.A..
4. Remove the CAM POWER C.B.A..
5. Remove the POWER MAIN C.B.A..
6. Remove the POWER SUB C.B.A..
7. Remove the AUDIO MOTHER C.B.A..
8. Unscrew the 3 screws (A) on CAMERA C.B.A. as shown in figure 9-1.
9. Disconnect the connector (A), (B) and (C) combined with the CODEC MOTHER C.B.A. as shown in figure 9-1,
and remove the CAMERA C.B.A..
Figure 9-1
10. Unscrew a screw (B) and remove the INNER FRAME TOP from CODEC MOTHER C.B.A. as shown in figure
9-2.
11. Unscrew a screw (C) and remove the INNER FRAME BOTTOM from CODEC MOTHER C.B.A. as shown in
figure 9-2.
Figure 9-2
CODEC MOTHER C.B.A.
SCREW (A)
CONNECTOR (C)
CAMERA C.B.A.
CONNECTOR (B)
CONNECTOR (A)
INNER FRAME BOTTOM
INNER FRAME TOP
SCREW (B)
CODEC MOTHER C.B.A.
SCREW (C)