Panasonic AG-HPX500, Service Manual

Page: 65 / 191

DIS-2
3. Removal of Side Case (R) Ass’y
1. Loosen the 5 screws (A) as shown in figure 3-1 and open the Side Case (R) Ass’y.
Figure 3-1
2. Disconnect the connector (A) and (B) as shown in figure 3-2.
3. Unscrew the screws (B) and (C) and remove the Side Case (R) Ass’y as shown in figure 3-2.
Figure 3-2
< Note at installation >
Do not forget the string(hinge) is hooked on SIDE CASE R BARRIER as shown in figure 3-3 when install Side
Case (R) Ass’y.
Figure 3-3
SCREW (A)
SCREW (C)
SCREW (B)
SIDE CASE R BARRIER
CONNECTOR (A)
CONNECTOR (B)
SCREW (A)