Panasonic AG-HPX500, Service Manual

Page: 58 / 191

INF-48
11-2-2. CAMERA Board
Refer to item “7. Save and write EEPROM data” on page
INF-32 about save and writing procedure.
Is it possible to backup the
data of CAM EEPROM ?
NO
YES
Please operate following < Procedure 2 >
Backup the CAM EEPROM data.
Exchange the CAMERA board.
Load the backup data to new board.
Turn the power ON.
Turn the power OFF and ON.
(Normal screen is displayed.)
NOTE:
An abnormal screen might be displayed.
(In case of the SYSTEM FREQ. set to the
CODEC side and the SYSTEM FREQ. on
the CAMERA side are the disagreements.)
*NOTE
Confirm that the software version.
･
CAM MICON
･
CAM FPGA
･
CAMBE FPGA
･
CAM EEPROM
Be the latest version.
(Refer to Global Service WEB Site about
number of latest version.)
Overall Check
*NOTE:
The CAM MICON
､ CAM FPGA ､ CAMBE FPGA and
CAM EEPROM do not required update.
If writing is necessary, please contact Panasonic
Service Engineering.
CAMERA Adjustment is required.
Regarding required adjustment items, refer to item “11-3-1. CAMERA Adjustment” (page INF-51 ).
< Procedure 1 >