Panasonic AG-HPX500, Service Manual

Page: 71 / 191

DIS-8
8. Removal of AUDIO MOTHER C.B.A.
1. Remove the Side Case (R) Ass’y.
2. Remove the Side Case (L) Ass’y.
3. Remove the P2CARD 1 and P2 CARD 2 C.B.A..
4. Remove the CAM POWER C.B.A..
5. Remove the POWER MAIN C.B.A..
6. Remove the POWER SUB C.B.A..
7. Disconnect a connector (A) on the FRONT MIC1 C.B.A. as shown in figure 8-1.
8. Unscrew a screw (A) and 2 screws (B), then remove the FRONT MIC Ass’y as shown in figure 8-1.
9. Unscrew a screw (C) and remove the MIC SHIELD 1 as shown in figure 8-1.
Figure 8-1
10. Disconnect the connector (B), (C), (D), (E), (F), (G), (H) and (I) as shown in figure 8-2.
Figure 8-2
CONNECTOR (A)
SCREW (A)
MIC SHIELD 1
SCREW (C)
SCREW (B)
CONNECTOR (D)
CONNECTOR (H)
CONNECTOR (I)
CONNECTOR (G)
CONNECTOR (F) CONNECTOR (E) CONNECTOR (C)
CONNECTOR (B)