Panasonic AG-HPX500, Service Manual

Page: 37 / 191

INF-27
6-4-1. Setting and confirmation of Date and Time of internal clock
< Confirmation method >
1. Clicking “Get” button, the date/time information in camera recorder is displayed.
2. Clicking “Clear” button, the displayed date/time is cleared. Clock information on the camera recorder is not
cleared.
< Setting method >
1. The date/time information of PC is displayed in the window as shown in following figure on real time.
2. When
the “Input” button is clicked, a date and time will be fixed on the Setting Tool screen (When the “Input”
button is clicked again, it will return to a real-time display.). And the window to enter date/time becomes valid.
3. Confirm that the date/time is displayed on the LCD panel (DISPLAY SETUP menu → DATE/TIME →
TIME&DATE).
4. Clicking “Set” button, clock is set in a camera recorder follow the set up on the Setting Tool screen. In case of
data/time is not input to window (gray window), clock information of PC is set. After click “Set” button, see the
display on LCD panel to confirm the date/time display have changed.
NOTE: In case of put the check in box “-9H” , the time of -9 hour from the time displayed on the Setting Tool is set.
NOTE: A setup of the date and time of internal clock can be set also with the OTHER FUNCTIOM menu (Refer to
the procedure of operation instructions for the setting method).
6-4-2. Hour Meter Display
1. Clicking “Get” button, total operation time is displayed.
2. Clicking “Clear” button, the display is cleared. The time information of camera recorder is not cleared.
NOTE: The OPERATION time can be confirmed also with the DIAGNOSTIC menu (Refer to item “3-1-2. Hour
Meter display” (page INF-7)).
Real time display