Panametrics Sentinel, User Manual, Page: 96 / 166

Chapter 5. Diagnostics
96 Sentinel™ User’s Manual
5.2 Displaying Diagnostic Parameters (cont.)
1. Make sure the system is connected to your computer, the system and the computer are turned ON, and
PanaView is up and running.
2. In the
File
menu, open a
New Meter Browser
.
3. In the
Output
menu, select either
Graphing/New
or
Text Display
.
4. Click on the
+
sign before each level to 3expand it.
5. Select the desired channel, and click on the
+
sign before the
Diag (Diag on Channel X)
option.
6. Double click on one or more of the six parameters and, depending on the number of parameters chosen and the
format selected in Step 3, a display similar to that shown in Figure 72 below or Figure 73 on page xcvii will appear.
Note: The Graphing/New selection will allow only one or two parameters per display (see Figure 73 on page xcvii ).
7. After the parameters have been observed and recorded, exit the display and repeat the procedure for any other
information.
Note: Upon exiting a display in graphical format, a prompt reading
“
Save chart data to log file?” appears. Respond
as desired and exit the display.
Figure 2: Diagnostic Display in Text Format