Panametrics Sentinel, User Manual, Page: 79 / 166

Sentinel™ User’s Manual 79
Chapter 3. Operation
3.11 Displaying Measurements
Use PanaView to observe the sensor information on the computer screen in any combination of channels,
measurement modes, and measurement units in either a text format or a graphic format.
To set up the display, complete the following steps:
1. Make sure the system is connected to your computer, the system and the computer are turned ON, and
PanaView is up and running.
2. In the
File
menu, open a
New Meter Browser
.
3. Under
Output
select either
Graphing/New
or
Text Display
, whichever is desired.
4. Click on the + sign before each level to open it. See Figure 61 below and Table 9 on page 18 for details on the
available options.
Figure 20: PanaView Output Menu