Panametrics Sentinel, User Manual, Page: 78 / 166

Chapter 3. Operation
78 Sentinel™ User’s Manual
3.10 Entering Velocity Constants
Use PanaView to enter fixed values for flow velocity. To accomplish this, complete the following steps:
1. Make sure the system is connected to your computer, the system and the computer are turned on, and
PanaView is up and running.
2. In the File menu, open the New Meter Browser .
3. To enter values for Channel 1 , click on the + sign before each level to open it (see Figure 43 on page lxvi ).
4. Click twice on Vel and the Velocity display appears (see Figure 60 below).
5. Enter the desired values and click on the OK button.
Note: The values should be entered in ascending velocity order.
6. To enter values for Channel 2 , repeat the above procedure under the Channel 2 directory.
7. When all the appropriate values have been entered, exit the program.
Figure 19: PanaView Velocity Correction Display