Appendix B. Calibration and Testing with PanaView
50
DigitalFlow™ XGF868i Service Manual
B.5.3.3 RAM Test
To check the RAM:
Note:
If you are in the Hardware Test option, skip to step 2.
1.
From the left pane of the
Calibration/Test
window, double-click on
Hardware Test
.
2. In the center pane, double-click on
RAM TEST
.
3. The right pane displays the
RAM Value,
along with an indication as to whether the RAM is functioning. Click
[Next
Item]
or
[Exit Page]
to return to the
Hardware Test
option, and
[Exit Page]
again to return to the main
Calibration/Test
menu.
B.5.3.4 FIFO Test
To check the FIFO:
Note:
If you are in the Hardware Test option, skip to step 2.
1.
From the left pane of the
Calibration/Test
window, double-click on
Hardware Test
.
2. In the center pane, double-click on
FIFO TEST
.
3. In the right pane, a message lists the desired number of bits, along with the approximate bias and the average
sample. Click
[Next Item]
to perform the test and
return to the
Hardware Test
option, and
[Exit Page]
again to return
to the main
Calibration/Test
menu.
B.5.3.5 LCD Test
To test the LCD:
Note:
If you are in the Hardware Test option, skip to step 2.
1.
From the left pane of the
Calibration/Test
window, double-click on
Hardware Test
.
2. In the center pane, double-click on
LCD TEST
.
3. The LCD display flashes three times, while a message in the PanaView right pane displays the test values. Click
[Next Item]
or
[Exit Page]
to return to the
Hardware Test
option, and
[Exit Page]
again to return to the main
Calibra
-
tion/Test
menu.
Summary of Contents for DigitalFlow XGF868i
