Panametrics DigitalFlow XGF868i, Service Manual

Page: 55 / 72

DigitalFlow™ XGF868i Service Manual 47
Appendix B. Calibration and Testing with PanaView
Figure 13: Saving Signal Array Data to File
B.5.2 Uploading the XGF868i Memory
IMPORTANT: This option is for factory use only.
The Upload XGM Memory option is another diagnostic tool.
IMPORTANT: Consult with Panametrics before using this data to change any parameters.
1. In the Calibration/Test menu, double-click on the Upload XGM Memory option.
2. The first prompt shows the Hex Start Address . Click
[Next Item].
3. The next prompt displays the value for the Hex # Bytes . Click [ Next Item].
4. PanaView now offers two options for Uploading the XGM memory.
• If you double-click on To Display , the right pane of the window appears similar to Figure 14 below, and the
data is available for immediate evaluation. Click [Exit Page] t o close the window and return to the
Calibration/Test menu.
Figure 14: XGF868i Memory Data Displayed on PanaView
• If you double-click on To File , the Save As window (similar to Figure 13 on page 47 ) opens. Enter a file name
and click
[Save].
PanaView stores the array data in a Windows file, and closes the Calibration/Test window.