Panametrics DigitalFlow GS868, Programming Manual, Page: 68 / 146

Chapter 3. Logging Data
58 DigitalFlow™ GS868 Programming Manual (2-Channel)
3.5.3 START DATE Prompt
11. Press [F1] to accept the displayed
Start Date or press
[F2] to enter a different start date. To start logging today,
press [F3] .
• If OK or TODAY was selected, you have finished setting up the error log. Proceed to Procedure Options below.
• Otherwise, complete the following steps to
Edit the Start Date.
a.
Enter the desired Year and press
[ENT]
. The acceptable range is 0 to 99.
b. Use the

] ,


] and [F1]-[F4] keys to select the desired
Month.
c. Enter the desired Day and press [ENT] . The acceptable range is 1 to the number of days in the selected
month (28, 29, 30 or 31).
Procedure Options
You have completed setting up the error log. Do one of the following:
• Use

]
and
 
] to review the previous menu prompts.
• Press [F1]-[F4] to select one of the LOG submenus.
• To return to the data screen and begin logging data, press the [ENT] key. The * on the locator bar indicates that
the Model GS868 is now compiling the specified error log.
The error log will continue to run until it is manually stopped, the meter runs out of memory (for a non-circular log), or
the entire 120 records (2 pages x 60 records/page) have been logged.