Panametrics DigitalFlow GS868, Programming Manual, Page: 16 / 146

Chapter 1. Programming Site Data
6 DigitalFlow™ GS868 Programming Manual (2-Channel)
1.3 Obtaining On-line Help
A context-sensitive, on-line help system is programmed into every Model GS868 flowmeter. On-line help, which
displays additional information related to the current task, may be accessed at any time by pressing the [HELP] key
on the keypad. The help information will be shown on the currently selected pane of the display screen, as shown in
Figure 2 below.
Figure 2: Typical On-Line Help Screen
After entering the on-line help system, the following functions are available on the option bar of the selected display
pane:
•
MORE: Press [F1] (or [F5] ) to access this function, and the next screen of text is displayed in the prompt area.
• EXIT: Press [F2] (or [F6] ) to access this function, and the Model GS868 returns to measurement mode.
• ERROR: Press [F3] (or [F7] ) to access this function, and the various Model GS868 error codes are displayed. Use
the [F1] - [F4] (or [F5] - [F8] ) function keys, in conjunction with the

] and


] keys, to obtain additional
information on the desired error code or to exit the help system.
Note: See the Service Manual for a complete listing of all error codes and messages
• FLOW:
Press
[F4]
(or
[F8]
) to access this function, and the various flow measurement parameters are displayed.
Use the
[F1]
-
[F4]
(or
[F5]
-
[F8]
) function keys, in conjunction with the 
]
and 
]
keys, to obtain additional
information on the desired measurement parameter or to exit the help system.
ON-LINE HELP
MORE FLOW EXIT ERROR