Panametrics CTF878, Startup Manual

Page: 69 / 108

Model CTF878 Startup Guide 61
Chapter 3.
2. The next prompt asks you to select the data source for the digital output. The choices vary with the function. For
Pulse Totalizer (see Figure 43 on page 60), the available choices include:
• Forward Totalizer
•
Reverse Totalizer
• Standard Forward Totalizer
•
Standard Reverse Totalizer
a.
Press
[ENTER]
to open the data source selection window.
b. Scroll to the desired source.
c. Press [SEL] to confirm your selection.
d. The prompt then moves to a list of unit types. (The available units depend on the selection made at the Data
Source prompt.) Scroll to the desired output unit.
e. Press [F3] (OK) to confirm your selection.
3. The last set of parameters that appears depends on the selection you made at the Function prompt.
If you selected Pulse Totalizer :
The prompt asks for the units/pulse and the pulse width (in microseconds). (Figure 43 on page 60 illustrates a Digital
Output window configured for the Pulse Totalizer function.) For the Units/Pulse and Pulse Width parameters:
a. Press [ENTER] to open the text box.
b. Use the numeric keys to enter the desired value.
c. Press [ENTER] to confirm your selection.
If you selected Frequency :
The prompt asks for the minimum and maximum value for the category and units selected and the minimum and
maximum frequency. For each parameter:
a.
Press
[ENTER]
to open the text box.
b. Use the numeric keys to enter the desired value.
c. Press [ENTER] to confirm your selection.