Panametrics CTF878, Startup Manual

Page: 59 / 108

Model CTF878 Startup Guide 51
Chapter 3.
Entry Confirmation
• To confirm the entries and return to Operate mode, press [F3] (OK).
• To leave the window without confirming the entries, press [F2] (Cancel) or the [ESC] key.
In either case, the CTF878 returns to Operate Mode.
3.1.5.3 Entering Pipe Parameters
To enter the Pipe option, scroll to the Pipe tab on the Program Menu and press [ENTER] . (From the Transducer
window, you can scroll back up to the Transducer tab and press the [

] arrow key to reach the Pipe window, and
press [ENTER] .) The screen appears similar to Figure 34 below. To step through each parameter, press the [

] key.
See the Program Menu Map, Figure 46 on page 65.
Note: Refer to the installation reference Sound Speeds and Pipe Size Data (914-004) for additional information
about pipe sizes and sound speeds.
Figure 34: Pipe Option Window
Pipe
Transducer Fluid Path
Other
5
Material
OK Cancel
OD, mm
15.71
ODxPI, mm Wall, mm
2
Sound Speed 600 m/s
Transducer/Pipe
Pipe