Pamex Enkore Series, Project Implementation Manual

Page: 64 / 88

Access Control Rule
It is time to elaborate how access rules works. All the locks will apply the access rule
when scan a card. Below is the default access rule settings :
You have to choose one of the three settings to apply to a combination of card types
and area types. The three choices are :
❖ Lock+Key : Area time control will be taken into consideration together with the
settings on the card/key to decide whether lock can be unlocked or not.
❖ Lock only : The system only takes area time control into consideration and
ignore the card/key settings.
❖ Key only : The system will take card/key setting into consideration and ignore
the area time control.
The NoPrivacy rule is a special rule for privacy locks ( the mode you set at lock
scheduling features ). The card type with NoPrivacy set to yes will ignore the private
mode which means the card is allowed to unlock the lock.
Therefore, if you like to block all users including the staff to enter swimming pool in
SIMPLE project, You have to do two things : 1. At lock scheduling function, set
lockplace P to private mode. 2. At lock access rule of system parameters function, set
Staff’s NoPrivacy to No.
❖
Steps to shut down swimming pool completely except Master Key
Previously we set swimming pool’s lock operation to
​ Private ​ mode, so let’s try
to edit ​ Access Rule Control ​ now. Navigate to edit page first.
64