Palram.com
15
v
• Installing End Profile Bases with CUT Roof Panels
Still on the ground, insert the Panel Gasket and Roof Panel into the End Profile Base.
4
5
Bring the entire assembly to the roof and set it in place.
6
Fasten the End Profile Base to the end rafter through the holes along the length.
The gap behind the Panel Gasket is normal, and helps
account for expansion of the Roof Panel.
• Gently tap the End Profile Base with a rubber mallet to fully seat the Panel Gasket.
• Hammer against a length of wood to prevent damage to the End Profile Base.
INSTALLATION
RAFTER
RAFTER
RAFTER
