Palram.com
13
5
Install the Inner Profile Cap Cover by GENTLY tapping it into place with a rubber mallet.
• Use a piece of wood to disperse the impact of the mallet and avoid damage to the Profile pieces.
• Start at the bottom of the roof line and work toward the top.
• Remove the protective film after each Roof Panel is fully installed and secured.
• Installing Inner Profile Cap Covers
Inner Profile Cap
Inner Profile Cap Cover
THE INNER PROFILE CAP MUST BE FULLY FASTENED BEFORE ADDING THE
CAP COVER. It is very difficult to remove the Inner Profile Cap Cover after installation.
START AT BOTTOM,
WORK TOWARD TOP
INSTALLATION
