Palram.com
19
2
After flashing is installed, measure, cut and insert Foam Flashing Strips (included in
SUNSCAPE® Kit) under the flashing, between each aluminum Profile.
• Add double-sided outdoor foam tape (not included) to the top of each piece of Foam Flashing Strip before
inserting it under the flashing. This will adhere the foam to the underside of the flashing.
• For a snug fit, cut Foam Flashing Strips 1/4" longer than the width between each aluminum profile.
APPLY THE TAPE
ONLY TO THE TOP
OF THE FOAM
FLASHING STRIP.
1
Install flashing if required by code. Flashing is NOT included in the SUNSCAPE® Kit.
• Installing Flashing (not included)
• Installing Foam Flashing Strips (included)
DO NOT ADHERE THE FOAM FLASHING STRIP TO THE SUNSCAPE PANEL. Adhesives that are
incompatible with polycarbonate will cause the SUNSCAPE® panel to craze and crack.
INSTALLATION
