To reduce the risk of serious injury or death and/or damage to the charger, this
device:
•
Must be installed, set up, and maintained by a qualified electrical technician
familiar with the construction and operation of this type of installation, and the
dangers involved.
•
Installation of the system must be made according to the local electrical and
building regulations of the country in which it is fitted.
•
Incorrect installation and testing of the charger could potentially cause
irreparable damage to either the vehicle’s battery or the charger. Any damage
caused as a direct result of incorrect installation is not covered by the device
warranty.
•
Do not install the charger near explosive, corrosive, or combustible materials,
chemicals, or vapors.
•
When transporting the charger, handle with care and do not drop, drag, or step
on the device.
•
Before commencing installation, ensure that the incoming mains supply has
been suitably isolated.
•
Suitably rated protective devices and wire types corresponding to the electrical
and temperature ratings of the installation must be utilized. Refer to section 6.
Safety Warning – Installation
be exposed to flammable vapors. Do not operate the charger near explosive,
corrosive, or combustible materials, chemicals, or vapors.
•
Always maintain a clean and clear area within the local vicinity of the charger.
•
Never store objects on the charger.
•
Avoid moisture or water ingress into the charger. Should ingress occur, isolate
power to the charger to avoid immediate danger, and seek professional
assistance.
Green Power, Green Lifestyle.
2
Summary of Contents for Lewden ASPEN Series
Page 1: ......
