7.2 Operating Steps – ASPEN Edition 672140
•
Following initial power up, the green (READY),
blue (CHARGE) and red lights (FAULT) are all
lit.
•
The unit enters standby mode once the blue
and red lights are extinguished, and the green
light (READY) is constantly lit.
•
The time from initial power up to the green
light on is 7 seconds.
STEP1 / Standby Mode
Plug the charging cable into the vehicle charging
inlet. The blue light (CHARGE) is constantly lit.
STEP2 / Connection to Vehicle Inlet
The blue light (CHARGE) begins to flash
automatically, charging is in process.
STEP3 / Charging
7. Operating Instructions
•
Standby mode
•
Connect to Vehicle Charging Inlet
•
User authorization (Only for Aspen Pro Edition)
•
Charging Message
•
Charging completed
7.1 Operating Procedures
•
If the red light (FAULT) is lit, remove the charge
connector from the vehicle and re-insert.
•
If red light is still lit, please refer to "7.5 Error
and Warning Messages".
A S P E N Series - User Manual
21
Summary of Contents for Lewden ASPEN Series
Page 1: ......
