•
When the charging cycle is completed, the
blue light (CHARGE) is constantly lit.
•
Release the charging connector from the
vehicle inlet, and replace its weatherproof cap*
•
Upon disconnection from the vehicle, the
charger will return to the standby mode (step
1) with the green (READY) light constantly lit.
STEP4 / Charging Complete
7.3 Operating Steps – ASPEN Pro Edition 672142
Plug the charging connector into the vehicle
charging inlet.
STEP2 / Connection to Vehicle Inlet
•
Following initial power up, green (READY), blue
(CHARGE) and red (FAULT) lights are all lit.
•
The unit enters standby mode once the blue
and red lights are extinguished, and the green
light (READY) is constantly lit.
•
The time from initial power up to the green
light on is 90 seconds.
STEP1 / Standby Mode
Note: If you have tagged the RFID card prior
to connection to the vehicle, you will need
to complete the insertion of the charging
connector within 180 seconds, otherwise the
RFID will need to be tagged again.
Green Power, Green Lifestyle.
22
Summary of Contents for Lewden ASPEN Series
Page 1: ......
