Strip back the insulation sheath of the three AC wires by
15~18mm.
Where a fine-stranded cable is used, install the cable ferrules provided on to
the three wires, and crimp with a suitable crimping tool.
L(L1) / N(L2) / PE(GND). Pass three wires through M25 waterproof gland part3.
3
GND/PE L1/L L2/N
Insert the three cores of the AC power supply cable into the
corresponding terminals of the green terminal block / L1-L /
L2-N / GND-PE. Tighten to a recommended torque of 1.5 Nm (13.3lb-in)
5
Green Power, Green Lifestyle.
18
Summary of Contents for Lewden ASPEN Series
Page 1: ......
