PALAZZANI RAGNO XTJ 32 / C, Operation And Maintenance Manual

Page: 108 / 210

Palazzani
Palazzani Industrie spa
OM 564 pag 2 Cap 5
motor to a feeding line, so operators have an alternative power source at their
disposal also in emergency; on the contrary, in absence of electric energy, the
power source can be replaced with the starting of the diesel engine
In both cases the work can continue and all safety devices are regularly working
3 Controls
Turning the selecting key on turntable symbol, assistant can operate any movement for
normal aerial work, or for re-entry in emergency, from the ground control panel.
In this case, all safety devices are regularly working
4 Emergency stop
Emergency red push button is mounted on all control stations and, when pressed, it
allows to stop the energy source activated at that moment.
Push-button is of self-retaining type and permanently cuts re-starting system from
any control station if it has not been re-set by rotation
If you do not succeed in starting the diesel or the electric engine, check whether
one of these “stop” buttons has been left stuck down or not.
6 Electropump for emergency (optional)
In case of failure or impossibility to use the service pumps, it is possible to
intervent, in order to recover people, onto the emergency elecric pump connected
to the equipment batteries.
Push the STOP button on the panel and act on the control levers
Is fed by the batteries of the diesel engine and, for overheating problems, can be
activated for cycles of 3’ with a pause of 15’
WARNING this electropump is to be used exclusively for recovery in
emergency